Loading
EnOcean energy harvesting wireless automation supplied by ME Integra in the UAE

What Is EnOcean Wireless Automation?

The idea behind EnOcean's self-powered wireless automation technology is based on a simple observation: where sensors capture measured values, the energy state constantly changes. Radio switches and sensors based on EnOcean's wireless controls harvest ambient energy for their power supply, for example switches from the actuating force of being pressed, or sensors from light energy.

EnOcean energy harvesting switch installed by ME Integra in the UAE

Energy Harvesting: Range and Reliability

This is accomplished through the so-called "energy harvesting" that generates energy levels of 50 microwatts, enough to transmit radio signals up to 300 metres in open space (30 metres inside buildings). EnOcean communicates via gateways with all available bus systems in the UAE, such as KNX or BACnet. Each transmitter present in the system has a unique address and communicates with a receiving unit. Despite the limited energy available, these highly efficient electronics can transmit the signal several times, guaranteeing high transmission reliability.

EnOcean wall-mounted wireless switch installed by ME Integra

No-Drilling Installation for Renovations

A huge advantage of an EnOcean system is the ability to mount switches and sensors on walls or glass surfaces throughout the building without drilling any holes. EnOcean devices are particularly suitable for renovations where laying cables is difficult or impossible. Appearance or materials, such as glass walls, may also make EnOcean wireless automation technology the practical choice.

Energy Harvesting, Wireless and Ultra-Low Power

Energy harvesting icon

Energy Harvesting

Wireless sensors harvest and manage the smallest amount of energy from their environment, rather than drawing on a battery.

Battery-free energy harvesting badge
Wireless connectivity icon

Wireless

EnOcean uses wireless standards optimized for ultra-low power consumption and energy harvesting, including compatibility with KNX and BACnet gateways.

Wire-free wireless badge
Ultra-low power icon

Ultra-Low Power

Energy management and highly efficient energy storage are key to battery-less, wireless sensor solutions that operate reliably over the long term.

Convenient low-power badge

The "Battery-Free by EnOcean" Seal

EnOcean offers the "Battery-Free by EnOcean" seal to highlight self-powered switches and make their benefits visible at a glance: battery-free and wire-free operation, maintenance freedom, flexibility and comfort.

EnOcean is the originator of the patented energy harvesting wireless technology behind this ecosystem, and the underlying radio standard is internationally standardized as ISO/IEC 14543-3-10, the same category of standard that governs technologies like Wi-Fi and Bluetooth.

EnOcean battery-free wireless sensor supplied by ME Integra in the UAE

Why Choose ME Integra for EnOcean in the UAE

  • 40+ OEM partners - access to a range of EnOcean-compatible switches, sensors and gateways.
  • 200+ completed projects across the UAE, including renovations where wiring was not practical.
  • Gateway integration handled properly - EnOcean devices connected into KNX, BACnet or other existing building systems.
  • Single point of contact for supply, installation and after-sales support.

Frequently Asked Questions

EnOcean is an energy harvesting wireless technology used in building automation. Switches and sensors generate their own power from ambient sources, such as the actuating force of pressing a switch or light energy, rather than relying on batteries or mains wiring.
Energy harvesting typically generates around 50 microwatts, enough to transmit a radio signal up to 300 metres in open space or around 30 metres inside a building. Each transmitter has a unique address and can repeat its signal several times to maintain reliability despite the limited energy available.
Yes. Because EnOcean switches and sensors need no battery and no wired power connection, they can be mounted on walls or glass surfaces without drilling, which makes them particularly suited to renovations where running new cable is difficult or undesirable.
Yes. EnOcean devices communicate through gateways with common building bus systems such as KNX or BACnet, allowing them to integrate into an existing building automation platform rather than requiring a completely separate system.
The "Battery-Free by EnOcean" seal identifies self-powered switches that operate without a battery or wiring, highlighting benefits such as maintenance-free operation, flexible placement and long-term reliability.